Cursos e Webinários da semana – 26 a 30 de Junho

Caro amigo, abaixo os destaques da semana.

Abraço!

Henrique

consulte sempre um engenheiro eletrônico

————

26/06/2012 – Applying Stepper Motors – Questions you must answer and things you must watch out for

This webinar will review some of the basic parameters necessary to properly select and apply stepper motor technology to motion applications. Topics included in this discussion will be a review of basic stepper speed-torque behavior including the stepper over-voltage ratio, a stepper in constant current operation vs. a stepper in voltage drive region, thermal ratings, the impact of winding changes on dynamic behavior, calculations and considerations for intermittent duty operation, motor/system accuracy, failure modes, and the application of all these criterion when applying stepper-based linear actuator product.

26/06/2012 - Applying Stepper Motors - Questions you must answer and things you must watch out for

——————————————————

26/06/2012 – Rapid Prototype & Development of USB Connected Devices Using mbed and LPCXpresso™

This webinar will demonstrate how projects developed using this cloud-based mbed development platform can be migrated to the NXP LPCXpresso™ tool chain for refinement and optimization. Since USB is such an integral part of so many microcontroller designs, the presenters will also showcase how the combination of mbed and ROM-based USB drivers in many NXP microcontrollers can accelerate the development of USB connected systems.

26/06/2012 - Rapid Prototype & Development of USB Connected Devices Using mbed and LPCXpresso™

—————————————————–

26-27/06/2012 – ESC – Embedded Systems Conference Brazil (esse não é gratuito!)

ESC - Embedded Systems Conference Brazil

=========

ATENÇÃO:     Repassando o aviso do prof.  Alessandro Ferreira da Cunha:

Pessoal, bom dia! Tenho excelentes notícias....

Alessandro Ferreira da Cunha 22 de Junho de 2012 14:23
Pessoal, bom dia! Tenho excelentes notícias. Conseguimos fechar com a Texas e com o ESC Brasil a realização de um
HANDS ON gratuito de Linux Embarcado focado na placa Beagle Bone. O HANDS ON tem apenas 30 vagas disponíveis e terá a duração de 04
horas. Neste evento demonstraremos os primeiros passos para ambientação e uso
da Beaglebone com Linux. Para tanto, faremos os seguintes experimentos: – Configuração do ambiente no desktop
– Preparação do hardware
– Preparativos para o 1o boot com Linux
– Testes com o Linux embarcado As inscriçoes serão feitas através do site do ESCBrazil, através do
link abaixo: http://www.escbrazil.com.br/ Acabei de conversar com os organizadores do evento, sobre o link de
inscrição, onde você deve preencher os seus dados para garantir a sua
vaga gratuita, e eles me informarão que o link está sendo montado e
assim que esta tarefa terminar ele será disponibilizado na página.Como são apenas 30 vagas, acreditamos que estas irão se esgotar
rapidamente.Portanto, se você tem interesse e disponibilidade para participar,
fique de olho na página do ESC Brazil e assim que o link for ao ar,
faça a sua inscrição.Abraços e espero ver vocês por lá.Alessandro Ferreira da Cunha
TECHtraininG – ENGENHARIA E TREINAMENTOS
alessandro@techtraining.eng.br
MSN –> afcunha01@gmail.com
SKYPE –> alessandroferreiradacunha
twitter –> @prof_afcunha
(11) 9536 – 3828
www.techtraining.eng.br

============================

——————————————————–

27/06/2012 – CEVA makes computer vision a mobile reality

The trend of using computer vision techniques for innovative embedded applications is a widespread reality. Initially used in industrial and security applications, it is now widely used in automotive applications (mostly for car safety systems), smartphones and tablets (for unique real-time applications and gaming), as well as to Smart TVs (for gesture recognition and other natural UI). Moreover, some of the cutting-edge imaging applications, such as super resolution, advanced super scaling and HDR are using techniques from the computer vision space. The main challenge for SoC and application developers is providing powerful computer vision capabilities combined with SW flexibility, while meeting the stringent power constraints of embedded applications. Using a vector processor such as the CEVA-MM3101, with an instruction set specifically tuned for embedded vision, makes computer vision a reality.

26/06/2012 - CEVA makes computer vision a mobile reality

——————————————————-

27/06/2012 – Reduce Mobile Device Costs and Board Area with MIPI Low Latency Interface (LLI) and M-PHY

The webinar will present a case study describing how LLI can be used to minimize DRAM footprint on a mobile phone system board. Particular attention will be paid to real-world implementation issues, such as clock domain, power and voltage management as well as integration with SoC interconnect fabrics.

27/06/2012 - Reduce Mobile Device Costs and Board Area with MIPI Low Latency Interface (LLI) and M-PHY

——————————————————

27/06/2012 – Cypress USB3.0 Solution with Altera FPGA Evaluation Kit

this 45-minute webinar, you will get insights into hidden technical trade-offs and costs associated with current interfaces between image sensors, FPGAs and host processors in your imaging, machine vision or data acquisition system. You will then learn about an industry solution that has emerged to address these challenges: USB 3.0 SuperSpeed.

27/06/2012 - Cypress USB3.0 Solution with Altera FPGA Evaluation Kit

——————————————————

27/06/2012 – Live Webinar on Safety Critical Applications and High Reliability Products

In this webinar the attendee will be introduced to numerous concepts including functional safety, IEC 61508, implementation techniques and Microsemi deployment examples.

Live Webinar on Safety Critical Applications and High Reliability Products

——————————————————

28/06/2012 – Simulation on the Cloud – Unlimmited Possibilities

Aldec introduces a new solution, Aldec Cloud™, which enables users to run RTL and Timing simulation on the cloud. It provides access to a virtually unlimited number of high performance servers. By running simulations on Aldec Cloud, customers can cut their regression testing from days to hours or even minutes. Aldec Cloud offers flexible usage model, with the time slots from a few to a few hundred hours. Such usage model suits well for on-demand simulation peak usage. Saving on the hardware infrastructure and IT related cost is an additional benefit for pushing your simulations to the cloud.

Agenda:

  • How Aldec Cloud helps solve resource bottleneck
  • Who benefits the most from simulating on the Cloud
  • Aldec Cloud Security
  • Detailed Overview to set up and run simulations on the Cloud
  • Live Demo

Simulation on the Cloud - Unlimmited Possibilities

——————————————————-

28/06/2012 – Understanding Mobile Apps for Automotive

Today’s merger of mobile handsets and automotive platforms is creating a brand-new market for app developers. However there are many differences between a phone and car. This session provides an introduction to the automotive market for the app developer looking to get into this space. Learn how a car infotainment system is structured, UI considerations that help prevent driver distraction, why HTML5 promises to be the next killer development environment for the car, and more.

28/06/2012 - Understanding Mobile Apps for Automotive

——————————————————–

28/06/2012 – Expand 3D Printing Across Your Organization

Expand 3D Printing Across Your Organization

=================================

30/06/2012 – Aplicações USB para MSP430

Serão abordados neste treinamento os seguintes itens:

1 – Características das portas USB
2 – Laboratório 01: exemplo de criação de uma porta de comunicação USB
3 – API Stack e Descriptor Tool
4 – Laboratório 2: Utilização do Descriptor Tool para configurar uma pilha USB
5 – Construindo aplicações para porta USB
6 – Laboratório 3: Edição de aplicações para porta USB

O valor do investimento será de apenas R$ 169,90 e agora este valor pode ser parcelado em até 6 vezes sem juros!

Aplicações USB para MSP430 Aplicações USB para MSP430  Aplicações USB para MSP430

—————————————————————–

02 a 16/julho/2012 – ARM Cortex M3 – Básico (inscrições por e-mail)

Proporcionar aos participantes conhecimentos sobre o funcionamento do microcontrolador ARM Cortex M3 LM3s6965, da Texas Instruments, focando na linguagem C.

As orientações sobre as formas de pagamento, vagas disponíveis e procedimentos de inscrição serão respondidos através do e-mail inscrever@TECHtraininG.eng.br.  Maiores informações podem ser obtidas através do telefone (11) 9536 – 3828.

Os detalhes do curso no link: CURSO ARM-BÁSICO.

Aplicações USB para MSP430

Deixe um comentário

Preencha os seus dados abaixo ou clique em um ícone para log in:

Logotipo do WordPress.com

Você está comentando utilizando sua conta WordPress.com. Sair /  Alterar )

Foto do Google

Você está comentando utilizando sua conta Google. Sair /  Alterar )

Imagem do Twitter

Você está comentando utilizando sua conta Twitter. Sair /  Alterar )

Foto do Facebook

Você está comentando utilizando sua conta Facebook. Sair /  Alterar )

Conectando a %s