Nova Revista, novas edições e webinários da semana

Publicado: 17 de setembro de 2012 em Revistas, Webinários e Cursos
Tags:, , , , , , , , , , , , , , , , ,

Caro Colega,

adicionamos a revista Appliance Design ao nosso acervo. Confira também as novas edições abaixo:

  Appliance Design Magazine - September 2012  Product Design & Development - September 2012  power electronics technology magazine, August 2012  EDN Europe September 2012

Boa Leitura!


Abaixo os webinários da semana. Confira outros webinários na seção de Cursos e Webinários:


18/09/2012 – Driving and Dimming LEDs


Topics to be addressed include:


  • State of the industry & Standards
  • Dimming issues still outstanding (dimming range, color shift, flicker, resolution, perception)
  • How to address them efficiently
  • Portable vs online vs automotive; Serial vs Parallel; EMI/RFI; thermal stresses
  • Component/driver selection (Controllers, regulators, converter topologies)
  • Novel techniques, tips
  • Q&A from audience





18/09/2012 – Debugging Methods for FPGA-Based Prototypes—Best Practices for System Troubleshooting and RTL Debug

This webinar is intended for all designers who are either already prototyping their ASIC design or are considering prototyping their next ASIC design. Learn about best practices and new technology that will increase the productivity of FPGA-based prototypes for hardware/software validation.



18/09/2012 – Advances in Polymer Film Materials for Extreme Applications

For more than 45 years, Kapton® polyimide film, only from DuPont, has served as a technically robust and unique solution for extreme application demands in industries such as aerospace, energy, automotive, and electronics. The key to its unlimited potential and ongoing success has been its versatility and robust thermal performance in applications involving extreme temperatures ranging from -269°C to +400°C.

In this Webinar, we’ll discuss some of the traditional Kapton® capabilities you may be familiar with as well as new, innovative capabilities you can learn more about:

  • Optical properties: matte vs. gloss, pigmented, colors, high transparency
  • Films for thermal transfer/heating
  • Ultrathin films

Du Pont - Webinar


18/09/2012 –Industrial Ethernet Best Practices

Learning Objectives:

  • Global industrial Ethernet: market overview
  • Ethernet cable categories and standards for an industrial environment
  • Ethernet auto-negotiation best practices
  • Creating the network: LANs, VLANs, rings, stars, copper, fiber, transceivers, speed, latency, and jitter
  • Sending the message: ports, packets, and protocols
  • Making it industrial: power, environment, mounting, monitoring, security, and expandability

Control Engineering - Webcast


18/09/2012 – NI Aerospace and Defense day

Este evento visa reunir especialistas da indústria e instituições de pesquisa de várias áreas, tais como: pesquisa avançada, pesquisa de voo, defesa e comercial, testes aeroespaciais, veículos de solo, embarcações, radares e veículos autônomos.

NI Aerospace and Defense Day - Simpósio


19/09/2012 – Achieve Lower Silicon Cost Using Embedded Memory Test and Repair

In this webinar, we will discuss advanced embedded memory test solution capabilities including hierarchical implementation and validation, fault detection in very deep submicron technologies, repair at the manufacturing level, diagnosis for process improvement and field repair and error correction (ECC) capabilities that address today’s design yield and reliability needs.



19/09/2012 – Implementing video surveillance

This webcast will present the two forms of video surveillance systems prevalent in the market today and the individual form of end equipment used in each. The major focus will be the edge devices or cameras and will review two image processing challenges and one power management challenge along with associated solutions available from Analog Devices to aid the design and implementation of video surveillance systems.

Analog Devices


19/09/2012 – Practical Guide to Making Advanced Jitter Measurements

Why this webcast is important:

To characterize high-speed digital links, jitter measurements are key to ascertain the quality of the signal being transmitted and yield a quick view of the bit error ratio (BER) that can be supported by the link. The measurement of jitter, even if the user is provided a one-button interface, is a sophisticated affair taking into account clock recovery and knowledge of phase locked loops (PLLs), jitter decomposition techniques and assumptions for them, crosstalk and its effects, and waveform statistics that require different approaches.

This webcast will review the analysis of a digital link and jitter decomposition, introduce whole eye-diagram analysis, and guide engineers through details and considerations required for valid jitter measurements. After viewing this webcast, the engineer will better understand the measurement of jitter as an engineering process.


20/09/2012 – Rethink your Systems Engineering Approach to Combat Complexity in Product Development

Engineering executives are increasingly challenged to accelerate the delivery of innovative products and manage the proliferation of product variants with fewer resources, while improving quality. The only way to overcome these challenges is through a comprehensive, multidisciplinary (i.e. hardware and software) approach that drives collaboration in the design of complex systems.



22/09/2012 – Linux Embarcado na Beagle Bone – São Paulo

Você aprenderá neste HANDS ON o passo a passo para embarcar o Linux em uma placa de desenvolvimento Beagle Bone através de um treinamento totalmente prático, com duração de 04 horas.

O conteúdo programático do treinamento, com maiores detalhes sobre o HANDS ON, pode ser obtido no site da TECHtraininG. Serão abordados neste treinamento os seguintes itens:

Introdução ao Linux Embarcado /Lab 1: teste de comunicação via rs232 / Lab 2: teste de comunicação via ethernet
Visão geral sobre o Sitara SDK / Lab 3: teste do SDK com um “Alô Mundo” / Abstração de acesso ao hardware no Linux
Lab 4: acesso aos LEDs via linha de comando / Lab 5: 1o acesso aos LEDs via programa em C / Lab 6: 2o acesso aos LEDs via programa em C





consulte sempre um engenheiro eletrônico

Deixe um comentário

Preencha os seus dados abaixo ou clique em um ícone para log in:

Logotipo do

Você está comentando utilizando sua conta Sair /  Alterar )

Foto do Google

Você está comentando utilizando sua conta Google. Sair /  Alterar )

Imagem do Twitter

Você está comentando utilizando sua conta Twitter. Sair /  Alterar )

Foto do Facebook

Você está comentando utilizando sua conta Facebook. Sair /  Alterar )

Conectando a %s